1. Manuals
  2. Brands
  3. EFI Manuals
  4. Server
  5. Fiery proServer
  6. Installation manual

EFI Fiery proServer Installation Manual

Hide thumbs Also See for Fiery proServer:
1
2
3
4
5
6

Advertisement

Table of Contents

See also: User Manual

Checking the site conditions

© 2014 Electronics For Imaging
11 July 2014
Fiery proServer Installation Guide
This document describes how to install the EFI
who are installing the Fiery proServer without the assistance of a qualified technician. This
document covers the following topics:
• Checking the site conditions (see
• (Optional) Installing the furniture (see
• Connecting the Fiery proServer (see
• Network bridging (see
• Licensing Fiery XF (see
• Setting up Fiery XF (see
• Completing the installation (see
Before you install the Fiery proServer, check the site conditions.
Printer readiness
• Is the printer configured for use with the Fiery proServer? For the correct settings, see the
documentation that accompanies the printer.
• Is adequate space available near the printer for the Fiery proServer?
• Does the printer require service or adjustments?
Before you install the Fiery proServer, print the printer color test page.
If the quality of the test page indicates that the printer needs adjustment, complete the
necessary service to the printer.
• Make sure that there is sufficient space for the Fiery proServer and optional furniture (if
present).
There should be sufficient space for the cables at the back and sides of the Fiery proServer.
20cm+ (8 in.)
20cm+ (8 in.)
F
1:
Space requirements
IGURE
™
page
1)
page
2)
page
2)
page
2)
page
4)
page
5)
page
6)
Back panel
Fiery proServer
Side panel
Fiery
proServer. It is intended for customers
®
*45129132*
45129132

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Fiery proServer and is the answer not in the manual?

Questions and answers

Related Manuals for EFI Fiery proServer

Summary of Contents for EFI Fiery proServer

  • Page 1 Before you install the Fiery proServer, check the site conditions. Printer readiness • Is the printer configured for use with the Fiery proServer? For the correct settings, see the documentation that accompanies the printer. • Is adequate space available near the printer for the Fiery proServer? •...
  • Page 2 Network • Make sure that the network is available at the time of installation. • Before you connect the Fiery proServer, verify with the IT administrator that the network is functioning. When the site is ready, installation of the Fiery proServer takes about three hours. Ensure that the IT administrator is available during the installation for network connectivity.
  • Page 3 11 Click OK, and close all windows. 12 If applicable, at the printer, configure the printer network settings with the static IP address that you set up in step You can now connect to the printer from the Fiery proServer and from the prepress network.
  • Page 4 The licensing procedure uses the dongle ID to create a fixed link between the software and the dongle. Each dongle is unique and can be identified by its electronically integrated ID. You cannot license Fiery XF if you connect to the Fiery proServer by using a remote desktop connection.

  • Page 5: Updating The Software

    5 Enter the EAC code in the appropriate edit boxes. Then click Next Step to establish a connection to the EFI Activation Server. The EAC code is provided as a printed document with Fiery proServer. The EAC code is case-sensitive.

  • Page 6: Completing The Installation

    Completing the installation To complete the installation of the Fiery proServer, do the following: • Save a backup of the Fiery proServer system to a USB drive, network share, or external hard disk drive. The system backup enables you to restore the system to an earlier state in case of a problem.

Table of Contents