Replace A Co 2 Cylinder - MAGIC FX MFX0803 User And Installation Manual

3.9 REPLACE A CO
1
Make sure that:
• the manual CO
position.
• the DMX Safety address is not
activated (FX LED indicator is
dimmed).
• the 24 V controller (if used) is not
powered.
2
Close the connected CO
3
Move the manual CO
position to release the pressure from the
system.
4 Move the manual CO
CLOSED position.
CYLINDER
2
valve is in CLOSED
2
cylinder.
2
valve in OPEN
2
valve back in
2
MAGICFX® STADIUMBLASTER — User and Installation Manual 23