Sharp TQ-GX30E Service Manual page 28

GX30
4.5.2 Default setting for the program.
• Activate the program and set defaults.
Downloaded from www.Manualslib.com
CONFIDENTIAL
manuals search engine
1) Select the COM port.
2) Set the GPIB No.
3) Select the test instrument.
4) Set the GPIB address.
5) Set the "Cable Offset" values.
For cables with connector
QCNWK0138AFZZ/
QCNWK0136AFZZ, set the
values as follows:
GSM 900: 0.60
DCS 1800: 0.95
PCS 1900: 0.96
GSM 850: 0.60
6) Auto Dial Setting
When the Auto Dial check
box is checked, an entered
number is automatically
dialed for performance
check.
7) Number Setting
Enter a number for Auto Dial.
Figure 44
2 – 20