Table of Contents
Advertisement
2) Selecting options and COM port
1. Uncheck the check box when using a cable for upgrading. Leave it checked when using Communication Box.
2. To initialize user area, check the File System Initialize check box. (User data will be deleted and the handset status will return to the default.)
3. Click here and in the pull-down list, select a communications port where the cable or Communication Box is connected.
When using Communication Box, set Wait Time.
Check the Communication Box check box to adjust Wait Time (default: 8 seconds). The time to delete the program data varies between handsets.
Handsets wait for the set Wait Time until the whole process is completed. If an error occurs, increase the value.
[Notes for the Wait Time setting]
When the set value is smaller than the default (8), the message on the left appears alerting you a possible error.
Click the "OK" button to proceed, and click the "Cancel" button to change the value.
Downloaded from
www.Manualslib.com
CONFIDENTIAL
1
2
manuals search engine
Figure 26
Figure 27
Figure 28
2 – 11
GX30
3
Advertisement
Chapters
Table of Contents
