Sharp TQ-GX30E Service Manual page 13

4. Functions
4.1. Default setting
SPST can restore the factory settings.
This function
1. Deletes all user data in the file system;
2. Restores all WAP settings to default; and
3. Restores the values set by the user to default;
(MEP_LOCK settings and the destination and operator name do not change.)
<Operation>
1) Set the COM port on the SPST initial screen and click "Default Set".
2) Click "Yes" to proceed. Click "No" to exit.
3) Click "Yes" to back-up the MEPLOCK data. Click "No" to restore default settings.
4) Communication starts.
5) The following appears when you select "Yes" in step 3 and MEPLOCK data exists. Click "Yes" to restore the data.
Downloaded from www.Manualslib.com
CONFIDENTIAL
manuals search engine
Figure 7
Figure 8
Figure 9
Figure 10
2 – 5
GX30