Table of Contents
Advertisement
I ENGLISH
I
DVD Camcorder: Advanced Recording
+ The Wind Cut function works only in Camera Mode. '='page 26
+ Use the Wind Cut when recording in windy places such as the beach or near buildings.
+ The Wind Cut function minimizes wind noise or other noise while recording.
- When the Wind Cut is on, some low pitched tones are efiminated along with the sound of the wind.
1. Set the [Mode] switch to [DISC]. (SC-DC173(U)/DC175/DC575 only)
2. Set the [Power] switch to [ !_1_ (Camera)].
3. Press the [MENU] button.
4. Move the [Joystick] up or down to select <Record>, then press the [Joystick].
5. Move the [Joystick] up or down to select <Wind Cut>, then press the [Joystick].
6. To activate the Wind Cut function, move the [Joystick] up or down to select <On>,
then press the [Joystick].
7. To exiL press the [MENU] button.
• Wind Cut icon ([1_]) is displayed.
Make sure Wind Cut is set to Off when you want the microphone to be as sensitive as
possible.
_Move
_Se_ect
_Exit
30 rain
16:9 Wide
[_]
Advertisement
Table of Contents
