Table of Contents
Advertisement
[ ENGLISH
]
DVD Camcorder:
Before Recording
Formatting may be required if a new disc is inserted.
Recognition of the disc will start.
For a DVD-R/+R DL disc: Formatting wilt automatically begin.
For a DVD-RW disc: You are prompted with the <Disc is not formatted. Format?> message.
Video (Video Mode) : If the disc has been finalize& you will be able to
Differences between
play the disc on most DVD Players/Recorders/Drives.
Video and VR mode
VR (VR Mode) : You can edit the disc on a DVD Camcorder, but
playback is only possible on a DVD Recorder that supports VR mode.
, Refer to page 11 for Finalized disc compatibility
Move the [Joystick] left or right to select <Video> or <VR>, then press [Joystick].
,
Please refer to page 123 for disc type descriptions and usage.
,
Upon completion, the <Complete!> message wilt appear.
,
If you select <Cancel>, the <Not formatted!> warning message wilt appear.
Formatting a new disc is required to record on it. To format later, use the <Disc Manager> menu. -page 79
For a DVD+RW disc: You are prompted with the <Disc format? All files will be deleted!> message.
Move the [Joystick] left or right to select <Yes>, then press [Joystick].
,
Upon completion the <Complete!> message wilt appear.
,
tf you select <No>, the <Not formatted!> warning message will appear.
Formatting a new disc is required to record on it. To format later, use the <Disc Manager> menu. '-page 79
<When a DVD-RW disc is formatted.>
1. Push the [OPEN] switch in the direction of the arrow.
• The disc cover wilt partially open.
2. Gently open the cover the rest of the way by hand.
3. Remove the disc.
• While pushing downthe center portion ofthe disc spindle, pick up the disc by the edges to remove.
4. Gently push the section marked [PUSH CLOSE] on the disc cover to close it.
The Finalize/Format functionsarenot availablewhenthe batterylevelis between_
and_.
Advertisement
Table of Contents
