Table of Contents
Advertisement
[ ENGLISH
]
Digital Still Camera Mode (SC-DC173(U)/DCI75/DC575
only)
*:o Photo Size function works only in M.Cam Mode. ",page 26
°:* You can select the size of a photo image to be recorded.
1. Set the [Mode] switch to [CARD].
2. Set the [Power] switch to [_,(Camera)].
3. Press the [MENU] button.
= The menu list will appear.
4. Move the [Joystick] up or down to select <Memory>, then press the [Joystick].
5. Move the [Joystick] up or down to seIect <Photo Size>, then press the [Joystick].
6. Move the [Joystick] up or down to seiect the desired photo size (1152x864 or
800x600), then press the [Joystick].
7. To exit, press the [MENU] button.
• The icon of the selected option is displayed.
= You can directly access the Photo Size function by using the [Q.MENU] button.
'-*page 27
= The number of recordable images varies depending on the recording environment.
= Regarding detailed image capacity, see page 91.
= Photo images that are recorded at 1152X864 on your DVD Carncorder may not
playback properly on other digital devices that do not support this photo size.
= High resolution images use more memory than lower resolution images. Therefore the
higher the resolution selected, the fewer wilt be the number of images available.
Photo Quality
_ Supe] Fine
Move
_
Seiect
_
Exit
[_
_
300 [El
8 rain
Advertisement
Table of Contents
