Arbor Repair; Arbor Assembly Removal - All Models - Simplicity 1691682 Service & Repair Manual

ARBOR REPAIR

ARBOR ASSEMBLY REMOVAL - ALL MODELS

1. Remove the mower deck (see Mower Deck Removal
and Installation).
2. Remove the belt guards as required to access
arbors.
3. Remove the PTO and arbor drive belts. See PTO
and Arbor Drive Belt Replacement.
4. Remove mower blade from the spindle to be rebuilt.
See Mower Blade Service.
5. From the bottom of mower deck, remove the six
Taptite hex screws retaining the spindle flange to the
mower deck.
6. Remove the arbor assembly from the deck.
Figure 14. Remove Belt Guard
Taptite
Hex
Screws
Figure 15. Spindle Removal
8 - 15
8 Mower Deck Repair
Arbor Repair