Step 4: Corner Brace For King Assembly; Step 4-C: Corner Brace For Crib Assembly - Baby Lock Momentum BLQM Assembly And Use Instruction Manual

Step 4: Corner Brace for King Assembly

Parts Needed:
1- Front Leg Brace Left
1- Front Leg Brace Right
2- Corner Support
2- Middle Leg Brace
26- M8 x 16mm SBHCS
Tools Required:
5mm Allen Wrench
4-1: Align the Corner Supports so that the long edge follows the table surface and fasten with M8 x 16mm
SBHCS. The Corner Supports should lay flush with the Table Assembly and Frame End surfaces. (Fig. 4-1)
4-2: Fasten the Middle Leg Braces to the Table Assemblies and Middle Leg. The Middle Leg Braces should
lay flush with the surface of the Table Assemblies and Middle Leg. (Fig. 4-1)
4-3: Attach the Front Leg Braces to the Table Assemblies and Frame Ends. (Fig. 4-2)
4-4: Securely fasten all the M8 x 16mm SBHCS in this Step and from Step 3.
Fig. 4-2

Step 4-C: Corner Brace for Crib Assembly

Parts Needed:
1- Front Leg Brace Left
1- Front Leg Brace Right
2- Corner Support
2- Middle Leg Brace
14- M8 x 16mm SBHCS
Tools Required:
5mm Allen Wrench
4-1-C: Align the Corner Supports so that the
long edge follows the table surface and fasten
with M8 x 16mm SBHCS. The Corner Supports
should lay flush with the Table Assembly and
Frame End surfaces. (Fig. 4-1-C)
Corner Support Long Edge
Fig. 4-1
M8 x 16mm SBHCS
Front Leg Brace Left
Fig. 4-1-C
Middle Leg Brace
M8 x 16mm SBHCS
Corner Support
Corner Support Long Edge
M8 x 16mm SBHCS
Corner Support
Page. 7