Section 2: Leader Cloth - Baby Lock Momentum BLQM Assembly And Use Instruction Manual

Section 2: Leader Cloth

Section 2-1: High thread count fab-
ric such as Muslin is recommended for
Leader Cloth material. Thick fabric may
be difficult to install in the rail Fabri-Fast
Slot.
Section 2-2: Cut your Leader Cloth
fabric to the match that of the Leader
Cloth Diagram with room for 1 inch for
a fabric casing and the width 6 inches
shorter than your rail length. Surge or
hem all edges.
Section 2-3: Fold over 1 inch for the fabric casing and sew a 3/4 inch casing with a conventional
sewing machine leaving both ends open.
Section 2-4: Slide the Fabri-Fast Tubing down the casing to ease the use of the Fabri-Fast system.
(Section 1)
Section 2-5: Pin the Leader Cloths to the appropriate sections of the quilt. (Fig-S. 2-2)
Leader Cloth Example
Casing
Take Up Leader
Insert Fabri-Fast Tube
Down the Length of
Casing
Fig-S. 2-2
Leader Cloth Diagram
3/4" Casing
Fig-S. 2-1
Pins
Top Leader
3/4" Casing
Backing Leader
3/4" Casing
Take-up Leader
Top Leader
Backing Leader
Center Marks
Casing
Quilt Top
Batting
Quilt Backing
Casing
Page. 19