Maintenance; After Finishing A Recording - Samsung SC-D352 Owner's Instruction Book

ENGLISH

Maintenance

After Finishing a Recording

✤ At the end of a recording you must remove the power source.
✤ When recording with a Lithium ion Battery pack, leaving the pack on the Camcorder can reduce the life span of the battery.
The Battery pack should be release after recording is completed.
1. Slide the TAPE EJECT switch in the direction of the arrow.
Opening the cassette door ejects the tape automatically.
■
Please wait while the tape is completely ejected.
■
2. After removing the tape, close the door and store the Camcorder in a dust free environment.
Dust and other foreign materials can cause square-shaped noise or jerky images.
3. Set the Power switch to the Off.
4. Disconnect the power source or remove the lithium ion Battery pack.
Press the BATTERY RELEASE button located on the bottom of the Camcorder
and slide the Battery pack in the direction of the arrow.
112 112
1
2
3
4