Display Menu Setting
Displaying the Date/Time
✤
The Date/Time function works in Camera/Player/M.Cam/M.Player modes.
✤
The date and time are automatically recorded on a special data area of the tape.
1. Set the Power switch to CAMERA or PLAYER.
2. Set the Mode switch to TAPE or MEMORY CARD. (SC-D353/D354/D355 only)
3. Press the MENU button.
The menu list will appear.
■
4. Move the Menu selector to the left or right to select Display, then press the Menu selector.
5. Move the Menu selector to the left or right to select Date/Time, then press the Menu selector.
6. Move the Menu selector to the left or right to select the display type of the Date/Time,
then press the Menu selector.
Display type of the Date/Time: Off, Date, Time, Date&Time.
■
7. To exit, press the MENU button.
[ Notes ]
■
The Date/Time will read 12:00 AM JAN.1,2005 in the following conditions.
- During playback of a blank section of a tape.
- If the tape was recorded before setting the Date/Time in the Camcorder.
- When the Lithium battery becomes weak or dead.
Before you use the Date/Time function, you must set the clock. See Setting the Clock on page 27.
■
ENGLISH
1
4
Camera Mode
√Display
LCD Bright
LCD Color
Date/Time
√Off
TV Display
√On
Move
Select
Exit
MENU
6
Camera Mode
Back
LCD Bright
LCD Color
Date/Time
Off
TV Display
Date
Time
Date&Time
Move
Select
MENU
Exit
33
33