Audio Dubbing (SC-D354/D355 only)
The Audio Dubbing function works only in Player Mode.
You can not dub sound on a pre-recorded tape in LP or 16 bit mode.
You can add sound to the original sound on a pre-recorded tape recorded in SP mode with 12bit sound.
Use the internal or an external microphone(not supplied) or other audio equipment.
The original sound will not be erased.
1. Set the Power switch to PLAYER.
If you want to use an external microphone, connect the microphone to
the external MIC input jack on the Camcorder.
2. Set the Mode switch to TAPE.
3. Press the
(PLAY/STILL) button and find the time frame of the scene to
4. Press the
(PLAY/STILL) button to pause the scene.
5. Press the A.DUB button on the remote control.
Audio Dubbing icon (
The Camcorder is ready for dubbing.
6. Press the
(PLAY/STILL) button to start dubbing.
(STOP) button to stop the dubbing.
[ Notes ]
You can not use the Audio Dubbing function while playing a write protected video tape.
To utilize an external MIC or sound source, connect a microphone to the MIC jack or use the AV cable to connect
external sound source input.
To dub an external sound source, set the AV In/Out function to AV In (SC-D355 only). (see page 76).
) will be displayed on the LCD screen.