User System Setup - Honeywell Galaxy TouchCenter Plus Installer Manual

This section describes how to setup users and user functions.
User PIN Setup
Each user must be assigned a name with a corresponding 4 to 6 digit User PIN in order to gain access to various
features and functions.
Users of the system are programmed in a central user setup location in the control panel that provides options to enable
various user details.
Authority Levels
Authority levels define the system functions a particular user can perform. Depending on the authority assigned to you,
there are certain system functions you may be prohibited from performing. The following information describes the
authority levels available in the keypad and provides the equivalent authority level name found in your alarm system
manuals. The authority levels available in the keypad are as follows:
EN50131-1 Level Authority Level
†
0
1
†
1
2
†
2
2
2 3
2 4
2 5
‡
6
2
‡
7
3
‡
8
3
† No access to menu functions
‡ The manager, engineer and remote codes (the last three codes on the system) have fixed types which cannot be
reprogrammed.
Note: All levels except Guard 0 can change their own PIN.
The authorised code level for deleting, adding, and editing users is level 6.
Note:

User System Setup

Cleaner (Guard in Flex)
Cleaner (Guard in Flex)
Caretaker
Users
Users
Users
Manager
Engineer
Remote
Panel Access Availability
Entered into event memory – no other option
Can only set the system and change own PIN
Can only set and unset the system and change own PIN
Menu options 11 to 19
Menu options 11 to 25
Menu options 11 to 32
Menu options 11 to 48
Menu options 11 to 72
Menu options 11 to 72
21