Honeywell Galaxy TouchCenter Plus Installer Manual page 18

ICON
1. Connect a Cat5/6 cable to your camera (LAN) and
connect the opposite end to an Ethernet connection
on your router.
2. Apply power to the Camera. It may take a few
seconds for initial power-up of camera.
3. Apply appropriate settings to the camera by
dedicated camera tool
4. On the Home
authorized code (or press the
followed by the
screen is displayed.
5. Press the
Discover
6. If the camera information is not automatically
obtained please check the settings from point 3 and
press Discover
Discover Add Edit
Notes:

To use the Pan/Tilt feature, select the camera name from the camera list and then press Pan/Tilt.
Multi-Media (cont'd)
ACTION
screen press the Camera icon and an
Multimedia
icon. The
Camera Camera List
icon to locate the camera.
again.
Setup Icons
Delete Delete Settings
All
icon
Camera Play Auto
Wifi Pan
18
NOTES
Camera Icons
Quad Full Pan/Tilt Back
View View