Miscellaneous - Century Hawk 4 User Manual

READY and RIBBON Lamps blink simultaneously
Possible Cause
Run out of ribbon
Ribbon jam
Ribbon Sensor
error
Only READY Lamp blinks
Possible Cause
Serial I/O error
Memory overflow

Miscellaneous

Vertical blank lines
Continuous vertical blank lines in printout indicate a dirty or faulty
printhead as shown below:
If the problem cannot be solved by cleaning the printhead, replace the
printhead.
The host shows 'Printer Timeout'
1. Check if the interface cable is connected.
2. Check if the printer is turned on.
If the situation remains unsolved, please contact your reseller or our
Recommend Solutions
Load a roll ribbon
Clear the jam
Service Ribbon Sensor
Recommend Solutions
Check DIP switches for
the baud rate settings
a. Restart the printer
b. Perform Reset
38
Remarks
To be serviced only
by qualified
personnel
Remarks