Century Hawk 4 User Manual page 33

Buttons
The three buttons perform different functions based on the mode the
printer is in. The printer operates in one of the following modes:
Normal Mode: Normal printer functions (i.e. Pause, Feed, and Cancel).
See the following table.
System Mode: Allows the printer to perform Reset, Media Sensor
Calibration and Self-testing. See the following table at section 'System
Mode'.
Mode Normal Mode
Feed one label
FEED
PAUSE - Press once to pause
- Press a second time
CANCEL - Cancel current batch
- Forces the printer to
LCD Display
A 2 line graphic LCD display is affixed to the front panel (For
CH-4204S and CH-4303S only). Data in the form of characters,
letters and numbers are shown on the LCD display. Please see below
"LCD Panel Operation".
- Blinking simultaneously with READY: Running out
of ribbon.
current print job
to resume printing
of labels
continue working
after an error has
been corrected
System Mode
Media Sensor Calibration
Self-test:
The Printer performs a
self-test and prints out a
configuration report
Reset:
Resets the printer to Factory
Default Settings
27