Century Hawk 4 User Manual page 37

3．Items to be set and operating guide
MAIN MENU
Common Settings
Offset settings
Network
Configuration
Language
Selection
Clear
Stand Alone
Printing*
Exit
*
Requires a PS/2 keyboard and the downloading of the Forms.
SUB MENU
Darkness
Speed
Return
Tear Offset
Positioning Offset
Cutting Offset
Peeling Offset
Return
IP Address
Port
Subnet Mask
Gateway
Return
Chinese
English
Return
Settings
Graphics
Return
Execute
Delete All
Delete 1 by 1
Return
DESCRIPTION
When set at '0', the printer will accept
the default setting or command setting,
if not, the printer will not accept the
default setting or command setting.
Return to main menu.
The increment for the Hawk 4S
CH-4204S is 0.125mm, Hawk 4S
CH-4303S is 0.085mm.
Return to main menu.
The range of XXX is 0-255, press
PAUSE( )to decrease, CANCEL( )
to increase, FEED(
next XXX. Upon completion, pressing
FEED(
"Save/Cancel" screen.
Return to main menu.
Return to main menu.
Clears only those settings
accomplished through the front panel.
To View, or Del All, or Del 1 by 1.
Return to main menu.
Execute stored forms.
Delete all stored forms.
Delete selected stored form.
Return to main menu.
Exit
31
)to move to
)will proceed to the