Table of Contents
Advertisement
6. Software Control - Lightware Device Controller
6.7. Settings Menu
6.7.1. Configuration Tab
Settings about establishing the connection to the matrix are available
on this tab.
IP Configuration
Getting the IP Address Automatically
The feature means that the matrix gets the IP address from the
DHCP server on the LAN. If DHCP server is not present, the device
gets an AutoIP address from 169.254.xxx.xxx domain automatically.
Set BOOTP, DHCP and AutoIP settings according to your network
requirements. Always press the Apply settings button to save changes.
INFO: Load default button restores the default network settings (fix
IP) to the device: fix IP Address: 192.168.254.254, Subnet Mask:
255.255.0.0, Default Gateway: 0.0.0.0.
Static IP Configuration
In this case, connected device has an IP address configuration set up
by the user/administrator. Depending on modified settings, you might
need to restart the device and the Control Software. Always press the
Apply settings button to save changes.
INFO: Load default button restores the default network settings (fix
IP) to the device: fix IP Address: 192.168.254.254, Subnet Mask:
255.255.0.0, Default Gateway: 0.0.0.0.
TCP Port Configuration
Devices can be accessed via this TCP/IP port number with TCP
connection. Port number can be modified to any number between
1025 and 65535 except the followings:
9999, 14000 - 14009, 30704, and 30718.
▪
To use a matrix with Barco Encore set the port to 23.
▪
▪
To use a matrix with Vista Spyder set the port to 10001.
Always press the Apply settings button to save changes.
MX8x8HDMI-Pro series – User's Manual
The Configuration Tab
30
Advertisement
Table of Contents
