Table of Contents
Advertisement
B. Optional Offset Adapter Installation
Optional use of a Simpson Duravent 15° Universal Elbow
Part Number 4615 may be purchased directly through your
local Simpson Duravent Pipe Distributor or from your local
Quadra-Fire dealer, Part Number DV-6DLR-E15ADSS.
Figure 19.1 shows a vertical installation and also how to
create an optional 30° elbow installation.
The 15° elbow may be secured directly to the flue collar.
Follow the pipe manufacturer's instructions for using
screws or rivets for attachment. Most pipe manufacturer's
152mm diameter flue liners may be attached directly to the
top of the 15° elbow.
A
30 degree
Figure 19.1
Flue Adapter
Vertical
344mm
30 Degree
371mm
17 August, 2018
30
o
B
A
Vertical
A
B
532mm
525mm
C. Securing Stove Pipe/Liner to Flue Collar
1. There are 4 already drilled holes in the flue collar 90
degrees apart. Attach the flue collar to the stove pipe/
liner. If the seal is questionable use high temperature
sealant such as stove mastic (Figure 19.2).
2. Attach gasket to bottom side of flue collar with a thin
coat of silicone.
Flue Collar
Figure 19.2
D. Leveling Legs
1. Remove the 2 screws already installed on each leg.
2. Move legs to the desired height.
3. Re-install the screws to secure in place.
B
Remove 2 screws from both sides.
Adjust the legs up or down to level
appliance.
Figure 19.3
7075-177A
VOYAGEUR GRAND AU
Gasket
Stove Pipe/Liner
19
Advertisement
Table of Contents
