KTM 690 Duke 2018 Owner's Manual page 171

–
Remove the screw on the rear of the turn signal housing.
–
Remove turn signal glass
–
Press the bulb carefully into the socket, turn it counterclock-
wise by about 30°, and pull it out of the socket.
Info
Do not touch the reflector with your fingers and keep it
free from grease.
V00066-10
–
Lightly push the new lamp into the socket and turn all the way
clockwise.
Turn signal (RY10W / socket BAU15s) (
–
Position the turn signal glass.
–
Insert the screw and first turn counterclockwise until it
engages in the thread with a small jerk. Tighten the screw
lightly.
–
Check that the turn signal system is functioning properly.
ELECTRICAL SYSTEM 15
1 .
p. 223)
169