Brake System; Antilock Brake System (Abs) - KTM 690 Duke 2018 Owner's Manual

13 BRAKE SYSTEM

13.1
3 0 0 3
112

Antilock brake system (ABS)

H
0 0 2
2
C
1 0 0 1
2 0 0 2
H01127-01
ABS unit 1 , which consists of a hydraulic unit, ABS control
unit, and return pump, is installed under the fuel tank. One wheel
speed sensor 2 is located in each case on the front and the rear
wheel.
Warning
Danger of accidents Changes to the vehicle impair the
function of the ABS.
–
Only allow the rear wheel to spin with the front brake
applied away from public road traffic if the ABS is
switched off.
–
Do not make any changes to the suspension travel.
–
Only use spare parts on the brake system which have
been approved and recommended by KTM.
–
Only use tires/wheels approved by KTM with the corre-
sponding speed index.
–
Maintain the specified tire air pressure.
–
Service work and repairs must be performed profes-
sionally. (Your authorized KTM workshop will be glad
to help.)
The ABS is a safety system that prevents locking of the wheels
when driving straight ahead without the influence of lateral forces.