Sensitivity - Philips 63059CM Installation & Operation Manual

Installation & Operation Guide

Sensitivity

Part of the superior performance of the Ceiling Occupancy Sensor involves the increased
sensitivity of the sensor system. The three settings are Low, Medium, and High. Each
application may be slightly different and the preferences of each user might be different. The
default setting (Medium) will be adequate for most situations. The settings are described as
follows:
Low: Lowest level of detection setting - when less detection is required - occupants are close
to the sensor or movements within the space are more pronounced. This level may result in
lights turning off with reduced activity.
Medium (default): Default setting - medium level of detection to fit most applications.
High: Highest level of detection - movements and activity within the space are less
pronounced. This level increases the possibility of false triggering.
To change the sensitivity selection of the sensor:
Step 1. Enter Programming Mode
(refer to page 6.)
Step 2. Press SENS button.
Step 3. Select the desired level of
sensitivity.
Exit programming by pressing the PGM (Program) button or continue with programming by
selecting another field.
10
Vision.net Ceiling Occupancy Sensor
Button 1 Low
Button 2 Medium
Button 3 High
Button 0 Factory Default
* Factory Default
* Medium