Table of Contents
Advertisement
Installation & Operation Guide
Time
The TIME field allows selection of the time-out period after the sensor no longer detects
occupancy. Periods may be selected from 1 to 30 minutes.
Note: Increasing the time delay will lower the possibility of a false Off trigger, but will also
lower the energy savings.
To change the time of the sensor:
Step 1. Enter Programming Mode
(refer to page 6.)
Step 2. Press TIME button.
Step 3. Select time-out period by
pressing the appropriate
button.
Exit programming by pressing the
PGM (Program) button or continue
with programming by selecting
another field.
8
Vision.net Ceiling Occupancy Sensor
Button 1
1 Minute
Button 2
3 Minutes
Button 3
5 Minutes
Button 4
10 Minutes
Button 5
15 Minutes
Button 6
20 Minutes
Button 7
25 Minutes
Button 8
30 Minutes
Button 0
Factory Default
* Factory Default
* 15 minutes
Advertisement
Table of Contents
