Replace The Battery - Honeywell 8680i Quick Start Manual

7. Click on either Create 1D Wifi Bar Code or Create 1D Wifi
Bar Code.
8. Print the bar code and scan it with the scanner to connect to
the WiFi network.

Replace the Battery

Note: The battery should be replaced in an environment free
from excessive dust or particulate to avoid an internal
buildup of dust in the unit.
If the LED on the scanner flashes red, it indicates the battery is
low. To replace the battery, slide the battery latch to the
unlocked position and lift up on the battery.
Replace the battery by snapping it in to the scanner. Slide the
battery latch to the locked position.
14