Appendix C: Summary of Remote Log-in Procedure:
• Connect the EkoMini
panel RJ-11 connector.
• Connect a computer (laptop preferred) with a modem to a telephone
line.
None.
• Dial the appropriate telephone number.
answer after approximately two rings.
• Press the ENTER key. The prompt "Password?" will appear. Enter
the default password of '11111' followed by the 'Enter' key.
• After a few seconds, the following screen should appear, shown in
Figure C-1 below.
System Date
and Time
Software
Version #
Repeater Serial
Number
DL and UL RF
Power Output
Levels, dBm
DL RF Peak
Output Level, dBm
TM
Configure a HyperTerminal session for 2400, 8, 1, None,
Figure C-1: EkoMini
repeater to a telephone line using the front
TM
Remote Login Session
The repeater should
UL RF Offset Relative
to DL, dB
Alarm Condition