Getting Started - Fusion Apollo MS-SRX400 Owner's Manual

Getting Started

See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
Apollo SRX400 Zone Stereo Controls
Button Function
Dial • Turn to adjust the volume, move through the menus, or
adjust a setting.
• Press to select an option or a setting.
• Press and hold to select the other tab in the screen.
• Press to turn on the device.
• Press to mute and un-mute the audio.
• Press and hold to turn off the device.
• Press to open the menu.
• Press to return to the previous screen from the menu.
• Press and hold to exit the menu.
• Press to open the source selection screen and select a
source.
• Press and hold to join and leave the FUSION PartyBus
network.
• Press to skip to the beginning of the track or to the previous
track, when using an applicable source.
• Press and hold to rewind the track, when using an
applicable source.
• AM/FM:
◦ Press to tune to the previous station or preset.
◦ Press and hold for faster tuning (manual mode only).
• Press to pause or resume the current track, when using an
applicable source.
• AM/FM: Press to cycle through the tuning modes (auto,
manual, and presets).
• Press to skip to the next track, when using an applicable
source.
• Press and hold to fast-forward the track, when using an
applicable source.
• AM/FM:
◦ Press to tune to the next station or preset.
◦ Press and hold for faster tuning (manual mode only).
Apollo SRX400 Zone Stereo Screen
The information displayed on the screen varies depending on
the source selected. This example shows the device playing a
track on a device connected using Bluetooth
technology.
Getting Started
WARNING
wireless
®
Source
Album art (if available from a compatible source)
Track details
Elapsed time and track duration (if available)
Selecting a Source
1
Select .
2
Turn the dial to highlight a source.
3
Press the dial to select the source.
Entering Text
1 In a field that allows you to enter text, select
existing characters.
2 If necessary, select
3
If necessary, select
4 Turn the dial to choose a character, and press the dial to
select it.
5 Select to save the new text.
Adjusting the Backlight Brightness
NOTE: If you connected the dim wire on the wiring harness to
the boat's illumination wire, the backlight dims automatically
when the boat lights are on. This may affect how you adjust the
brightness setting.
1
Select > SETTINGS > BRIGHTNESS.
2 Turn the dial.
Enabling Standby Mode
You can set the stereo to enter a low-power standby mode when
you turn off the ignition or hold
™
or press again, it takes less than the typical 30 seconds to
turn on.
NOTE: When the stereo is in low-power standby mode, it
continues to draw current from the battery. The maximum
current draw in standby mode is 50 mA.
Select > SETTINGS > POWER OPTIONS > STANDBY
MODE.
The stereo now enters standby mode when you hold
Adjusting the Volume
Turn the dial.
Muting all Connected Stereos
You can quickly mute the audio from this stereo or from all
stereos connected to the network
Networking, page
1
From any source, select
The mute symbol appears and audio from this stereo is
silenced.
2
Press and hold the dial to select MUTE SYSTEM.
Audio from all connected stereos is silenced.
3
Press the dial to select UNMUTE SYSTEM.
Audio is restored to all connected stereos.
Adjusting the Tone
1
Select > SETTINGS > ZONE > ZONE 1 > TONE.
2 Turn the dial to adjust the level.
3
Press the dial to switch to a different tone.
or to use numerals or letters.
to change the case.
. When you turn on the ignition
Audio Control
(FUSION PartyBus
3).
.
to erase the
.
1