Related Manuals for Chauvin Arnoux PAC 11
Summary of Contents for Chauvin Arnoux PAC 11
- Page 1 GB - User’s manual PAC 11 北京海洋兴业科技股份有限公司（证券代码：839145） 电话：010-62176775 www.hyxyyq.com...
- Page 2 „ Only use the PAC 11 clamp indoors. „ Do not expose the clamp to running water. „ Do not use the PAC 11 clamp on uninsulated conductors at a voltage of more than 600 V in relation to the earth.
-
Page 3: Table Of Contents
SUMMARY 1. PRESENTATION ........................11 2. DESCRIPTION ........................11 3. OPERATING PROCEDURE ....................11 3.1. Switching ON .......................11 3.2. DC Zero adjustment ....................11 3.3. Measurement .......................12 3.4. Overload indication ......................12 3.5. Auto OFF ........................12 4. SPECIFICATIONS ........................12 4.1. Reference conditions ....................12 4.2. Operating conditions ....................13 4.3. -
Page 4: Presentation
1. PRESENTATION The PAC 11 current clamp measures DC or AC currents, without opening the circuit they are flowing in. The current clamp is used as an accessory for multimeters, recorders, etc. This clamp measures DC currents up to 600 A and AC currents up to 400 A rms (600 A peak). It outputs the form and amplitude of the current measured as a voltage image of the primary current. -
Page 5: Measurement
60 A on the 40 A range (10 mV/A) or 600 A on the 400 A range (1 mV/A). 3.5. AUTO OFF The PAC 11 has an Auto Off feature which switches off 10 minutes after the clamp has been switched on, without the controls being used. -
Page 6: Operating Conditions
4.2. OPERATING CONDITIONS The instrument must be used in the following conditions to satisfy the safety of the user and the metrological performance : - Use indoors ≤ - Working altitude : 2000 m ≤ - Transportation altitude : 12 000 m - Environmental conditions : see graph below 4.3. - Page 7 „ Phase error (45 ... 65 Hz) Primary current 10 ... 20 A 20 ... 40 A Phase shift ≤ ≤ 3° 2.2° ≤ - Rise time from 10 to 90 % Vs : 100 µs ≤ - Fall time from 90 to 10 % Vs : 100 µs ≤...
-
Page 8: Mechanical Specifications
4.4. MECHANICAL SPECIFICATIONS - Watertightness : IP 30 in accordance with IEC 529 - Clamping diameter : 1 cable ∅ 30 mm (or 2 cables ∅ 24 mm) a busbar of cross section 50 x 10 mm - Outside dimensions of clamp : 224 x 97 x 44 mm - Fitted lead : 1.5 m - Weight :... - Page 9 „ Verwenden Sie den Zangenstromwandler PAC 11 nur in Innenräumen ! „ Den Stromwandler nicht mit Wasser bespritzen oder in Wasser eintauchen. „ Verwenden Sie den Zangenstromwandler PAC 11 niemals an nicht isolierten Leitern, die ein Potential von mehr als 600 V gegenüber Erde aufweisen.
- Page 10 5. ANNEXE / APPENDIX / ANHANG / ALLEGATO / ANEXO Description, voir page 4 Description, see page 11 Beschreibung, siehe Seite 18 Descrizione, vedere pag. 25 Para la descripciòn, véase página 32 北京海洋兴业科技股份有限公司（证券代码：839145） 电话：010-62176775 www.hyxyyq.com...