Receiving Automatically In The Ans/Fax Mode; Receiving Manually Using An Extension Telephone - Samsung SCX-4216F User Manual

Receiving Automatically in the Ans/Fax
Mode
For this mode, you must attach an answering machine to the
EXT jack on the back of your machine.
If the caller leaves a message, the answering machine stores the
message as it would normally. If your machine hears a fax tone
on the line, it automatically starts to receive fax.
N :
OTES
• If you have set your machine to Ans/Fax mode and your
answering machine is switched off, or no answering machine is
connected to your machine, your machine will automatically go
into Fax mode after a predefined number of rings.
• If your answering machine has a 'user-selectable ring counter',
set the machine to answer incoming calls within 1 ring.
• If you are in Tel mode (manual reception) when the answering
machine is connected to your machine, you must switch off the
answering machine, or the outgoing message from the
answering machine will interrupt your phone conversation.
Receiving Manually Using an Extension
Telephone
This features works best when you are using an extension
telephone connected to the EXT jack on back of your machine.
You can receive a fax from someone you are talking to on the
extension telephone without having to go to the fax machine.
When you receive a call on the extension phone and hear fax
tones, press the keys "*9*" (star nine star) on the extension
telephone.
The machine receives the document.
Press the buttons slowly in sequence. If you still hear the fax
tone from the remote machine, try pressing "*9*" once again.
"*9*" is the remote receive code preset at the factory. The first
and the last asterisks are fixed, but you can change the middle
number to whatever you choose. For details on changing the
code, see page 1.15.
G F F
ENERAL AX UNCTIONS
2
2.9