General Safety Information - Hobot 268 User Manual

Q9: What to do if HOBOT unexpectedly stops and the red light is flashing, with no
alarm sounding?
Ans:(1) User can move HOBOT to safe area by remote control, or pull HOBOT back
with safety rope. Gently pull the safety rope at an angle close to the glass to
prevent it from falling off the glass.
(2) Remove obstacles on the glass surface
(3) Check whether there is air leakage caused by a gap or uneven window
frame.
Safety information about power adapter/battery
 Use only the power adapter supplied with this device. Use of other types of
power adapters will result in malfunction and/or danger.
 Please use a proper electrical outlet and make sure no heavy objects are placed
on the power adapter or the power cord.
 Allow adequate ventilation around the adapter when using it to operate the
device. Do not cover the power adapter with objects that will reduce ventilation
and cooling.
 Do not use the adapter in a humid environment. Never handle the adapter with
wet hands.
 Connect the adapter to a proper power source. The voltage requirements are
listed on the adapter.
 Do not use a broken adapter, power cord, or plug.
 Do not attempt to service the adapter. There are no service parts included.
Replace the whole unit if it is damaged or exposed to high moisture. Consult your
HOBOT dealer for help and maintenance.
 The battery used in this device may present a risk of fire or chemical burn if
mistreated. Do not disassemble, short the contacts, heat above 60℃(140℉), or
incinerate.
 If you have to dispose of old equipment, please take it to the local recycling
center for recycling electrical and electronic parts.

General safety information

 Retain the safety and operating instructions for future reference.
 Follow all operating and use instructions.
 Do not expose your device to rain or excess humidity, and keep it away from
liquids (such as beverages, faucets, and so on).
.
- 12 - HOBOT Technology Inc.