Frequently Asked Questions (Faq) - Hobot 268 User Manual

Power adapter/DC extension cable
Power adapter
STEP 3 :
Connect AC cord to
AC power port

Frequently asked questions (FAQ)

Q1: When the power switch is turned on, the FAN does not rotate, and no any beep
sounds.
Case
1.
Battery voltage is
too low
2.
Hardware failure
Q2: When the power switch is turned on, the FAN is rotating, Blue-LED is lighting,
Red-LED is flashing, with repeat beep sounds.
Ans: No electrical power supplied. Please connect and check power cord, adapter,
and the device.
LED signal/Sound
Blue: flash
Red: off
Orange: on
Sound: no beep
Blue: flash
Red: flash
Sound: beep
STEP 1
DC extension cable
Situation and Solution
It means battery charge is too low. Wait for
battery to fully charge (green light is lit). If
machine still can't be used after charging for 8
hours, the battery should be changed.
Machine hardware failure.
Please contact a local retailer or local
authorized dealer for repairs.
- 10 -
DC plug
L-shape connector
STEP 2 :
Plug into DC power jack
HOBOT Technology Inc.