Vnc−Server − Operate The El 1Xx By Remote Control Via Internet Or Lan - Lenze EL 103 ECO PLC Operating Instructions Manual

VNC−Server − Operate the EL 1xx by remote control via Internet or LAN
8.4.5 VNC−Server − Operate the EL 1xx by remote control via Internet or LAN
The EL 1xx can be operated by remote control from a PC via Virtual Network Computing
(VNC). This allows you to work on a remote PC as if you were sitting in front of your EL 1xx.
Prerequisite:
The EL 1xx is switched on and connected to the network/Internet (¶ 33).
ƒ
A VNC client is installed on the PC.
ƒ
Access to the server has been enabled on the EL 1xx (Start ® Settings ® Control Panel ®
ƒ
Startup)
)
Note!
How to proceed if you wish to enable/disable the VNC Server via Web Server:
ƒ
ƒ
ƒ
How to proceed:
1. Start the VNC client on the PC.
2. Enter the IP address of the EL 1xx.
The HMI IP address of the EL 1xx will be displayed if you double−click the network
symbol in the status bar of your EL 1xx.
If the connection is password−protected, your password will be queried.
The connection will be established.
LDCDS−EL100 EN 8.0
Start the Web Server in SysAdmin mode on the PC (¶ 65).
Click System tools ® Processes.
Enter cevncsvr in the "Launch Process" field and click Execute to activate the
VNC server.
Click Kill beside the "cevncsvr" entry in the list of current processes to
deactivate the VNC server.
l
Access EL 1xx via server functionality
Operation 8
67