Installing Fonts - Lenze EL 103 ECO PLC Operating Instructions Manual

7 Commissioning

Installing fonts

7.7 Installing fonts
If you want to use additional fonts, for instance containing Asian characters, on the EL 1xx,
you can implement them by means of the "AddFont.exe" tool.
)
Note!
Please observe the size of the font files, in particular for Asian fonts. To begin
with, check whether the files still fit into the internal flash memory of the
EL 1xx or if they have to be swapped out to an SD/SDHC card.
How to proceed:
1. Depending on the memory location, create the following directory for the additional
fonts:
Internal flash memory: \Flashdisk\Fonts
SD/SDHC card: \Storage\Fonts
2. Copy the "Addfont.exe" file from the "L−force PC−based Automation" DVD to this
directory.
3. Also copy the font files to this directory.
4. Extend the "\Flashdisk\Autostart.txt" file according to the following example:
;=============================================================
; use API addfont in Flashdisk\Fonts!!!!!
; Example: ;\Storage\Fonts\AddFont.exe Storage\Fonts\
;==============================================================
\Flashdisk\Fonts\AddFont.exe Flashdisk\Fonts\
5. Save the "Autostart.txt" file.
6. Restart the EL 1xx.
38
l
LDCDS−EL100 EN 8.0