Initial Switch−On - Lenze EL 103 ECO PLC Operating Instructions Manual

7 Commissioning
Initial switch−on
7.2 Initial switch−on
How to proceed:
1. Check the whole wiring for completeness and correct installation.
For comprehensive inputs, we recommend to connect an external keyboard and mouse
to the USB port.
2. Switch on the voltage supply of the EL 1xx.
– The EL 1xx boots up, the operating system is started.
– If the EL 1xx is protected by a password, it will be queried.
– If the Show Explorer control field in the StartUp Control Panel Applet is marked
(¶ 41), the Windows CE desktop will be displayed.
– If an autostart of the Remote Access Manager is specified in the VisiWinNET
Control Panel Applet (¶ 43), it will be started.
– If an autostart is specified for a project in the VisiWinNET
(¶ 43), it will be started.
32
l
â
â
Control Panel Applet
LDCDS−EL100 EN 8.0