Frost And Storm Warnings; Activate | Deactivate Frost Or Storm Warnings - La Crosse Technology 327-1417BW Instructional Manual

Frost and Storm Warnings

• This station offers the option of active Frost and Storm alerts.
• Simply activate the alerts to use them.

Activate | Deactivate Frost or Storm Warnings

1. Hold the WARNING button for 3 seconds to view frost and storm warnings.
2. Press and release the + or -/CH buttons to activate/deactivate frost and storm
warnings.
3. Press and release the WARNING button to confirm and move to the next item.
Note: The warning values are not programmable. You can only activate/deactivate the
frost or storm warning.
Frost warning OFF use +/- to arm (turn on)
CH 1
Note: When setting FROST alerts for channels 2 & 3, user will select channel first
(1, 2, 3) then select outdoor alert.
• FROST Alerts cannot be set for channel 2 & 3 if no additional sensors are connected.
Frost Warning:
• When the outdoor temperature is between: 28 °F to 37 °F (-2 °C to 3 °C), and the
frost warning is active a Frost Warning will alert you with a flashing snowflake icon and
the station will sound.
• Outside of this range the frost warning is not active.
• Weather station will beep 5 times each minute, for 5 minutes. After 5 minutes the
warning icon will flash until frost warning is out of range.
327-1417BW
Storm warning OFF use +/- to arm (turn on)
CH 1
Wind Speed Weather Station
Back
CH 1
to
Top
Page | 10