Using The Watch In A Medical Facility Or Aircraft - Casio 5544 Operation Manual

Checking the Last Time
Adjustment Result
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Press (B).
The second hand points to the result of the
last auto time adjustment operation. The
watch hands will return to indicating the
current time if you do not perform any
operation for nine or ten seconds.
[Y(YES)]: Last time adjustment operation
successful.
[N(NO)]: Last time adjustment operation
failed.
Second hand
Note
Even if there was a successful time
●
calibration signal receive operation or
connection with a phone, the second
hand will point to [N(NO)] if you
adjusted the time and/or date setting
manually.
Operation Guide 5544
Using the Watch in a Medical
Facility or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto time
calibration signal receive or connection with a
phone may cause problems, you can perform
the procedure below to disable such
operations. To re-enable auto time
adjustment, perform the same operation
again.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Press (B).
The second hand will indicate the last
receive result for nine or ten seconds.
3.
Within 10 seconds after pressing (B)
above, pull out the crown to the first click.
If more than 10 seconds elapse before
●
you pull out the crown after you press
(B), the second hand will return to
indicating seconds. If this happens,
press (B) again.
4.
Rotate the crown to disable auto time
adjustment.
[Y(YES)]: Auto time adjustment enabled.
[N(NO)]: Auto time adjustment disabled.
5.
Push the crown back in.
Note
If the watch is paired with a phone, G-
●
SHOCK Connected can be used to
disable auto time adjustment.
Using G-SHOCK Connected to
l
Disable Auto Time Adjustment
Using Mobile Link with
a Mobile Phone
While there is a Bluetooth connection
between the watch and phone, the watch time
setting is adjusted automatically. You can also
change the watch's other settings.
Note
This function is available only while G-
●
SHOCK Connected is running on the
phone.
This section describes watch and
●
phone operations.
X : Watch operation
Y : Phone operation
Connection
Connecting with a Phone
This section explains how to establish a
Bluetooth connection with a phone that is
paired with the watch.
If the watch is not paired with the phone you
●
want to connect with, refer to the information
below and pair them.
C Pair the watch with a phone.
l
1.
Move the phone close to (within one meter
of) the watch.
2.
X While the second hand is not pointing to
e , hold down (C) for about four seconds.
This causes the second hand to move to
e and establishes a connection between
the watch and phone.
Important!
Crown
If you have problems establishing a
●
connection, it could mean that G-
SHOCK Connected is not running on
the phone. On the phone's home
screen, tap the "G-SHOCK
Connected" icon. After the app starts
up, hold down the watch's (C) button
for about four seconds.
8