Unpairing; If You Purchase Another Phone; Configuring World Time Settings - Casio 5544 Operation Manual

Note
The connection will be terminated if
●
you do not perform any operation on
the watch or phone for a fixed amount
of time.
To specify the connection limit time,
perform the following operation with G-
SHOCK Connected: "Watch
settings" n "Connection time". Next,
select a setting of 3 minutes, 5 minutes,
or 10 minutes.
Canceling a Connection with a
Phone
Pressing any button terminates the Bluetooth
connection and returns the second hand to its
normal operation.
Connected Disconnected
Using the Watch in a Medical Facility
or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto time
calibration signal receive or connection with a
phone may cause problems, you can perform
the procedure below to disable such
operations. To re-enable auto time
adjustment, perform the same operation
again.
1.
Y Tap the "G-SHOCK Connected" icon.
2.
X Hold down (C) for about four seconds.
This causes the second hand to move to
e and establishes a connection between
the watch and phone.
3.
Y Perform the operation shown on the
phone screen to enable or disable auto
time adjustment.
Operation Guide 5544

Unpairing

1.
X If the watch is connected with a phone,
press any button to terminate the
connection.
Connected
2.
Y Tap the "G-SHOCK Connected" icon.
3.
Y Perform the operation shown on the
phone screen to unpair.

If you purchase another phone

You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
C Pair the watch with a phone.
l
Configuring World Time
Settings
Specifying a World Time City with G-SHOCK
Connected causes the watch's World Time
City to change accordingly. The standard
time/summer time setting of the World Time
will be adjusted automatically without any
watch operation required by you.
Note
G-SHOCK Connected World Time lets
●
you select from among approximately
300 cities as the World Time City.
Selecting a World Time City
●
1.
Y Tap the "G-SHOCK Connected" icon.
2.
X Hold down (C) for about four seconds.
This causes the second hand to move to
e and establishes a connection between
Disconnected
the watch and phone.
3.
Y Perform the operation shown on the
phone screen. The World Time setting will
be reflected on the watch.
You can determine whether a World
●
Time is a.m. or p.m. by checking the
position of the small 24-hour hand.
World Time hour and minute
World Time hour (24-hour)
9