Stopwatch Mode
●
The second hand, and the small hour and
minute hands indicate the elapsed stopwatch
time.
The main hour and minute hands indicate
●
the current time.
①
②
③
A Stopwatch seconds
B Stopwatch hours
C Stopwatch minutes
D Stopwatch hours (24-hour time)
The hand points to the A-side for hours 0
through 12, and to the P-side for hours 12
through 24.
Timer Mode
●
The second hand, and the small hour and
minute hands indicate the current countdown
time.
The main hour and minute hands indicate
●
the current time.
①
②
③
A Timer seconds
B Timer hours
C Timer minutes
D Timer hours (24-hour time)
The hand points to the A-side for hours 0
through 12, and to the P-side for hours 12
through 24.
Operation Guide 5544
Alarm Mode
●
The small hour and minute hands indicate the
alarm time.
The second hand indicates the alarm enabled/
disabled setting.
The main hour and minute hands indicate
●
the current time.
Start/Stop
④
Reset
A Alarm enabled/disabled
B Alarm hour
C Alarm minute
D Alarm hour (24-hour time)
The hand points to the A-side for a.m. times,
and to the P-side for p.m. times.
Using the Crown
The watch's crown is a screw-in (screw lock)
type. To use the crown, you first need to rotate
it towards you (leftwards) to loosen it.
Start/Stop
④
Reset
Pulling Out and Pushing In the Crown
●
To perform a crown operation, pull it out to the
first or second click and then rotate it. Do not
pull the crown with too much force.
First click
Second click
①
④
Enabling/
Disabling the
②
③
Alarm
Crown
Loosen
Normal timekeeping
Important!
To prevent loss of water resistance
●
and/or damage due to impact, be sure
to screw the crown in by rotating it
away from you as you push it in.
Screw in
When pushing the crown back in, take
●
care not to apply too much force.
Fast Forward/Fast Reverse
●
After pulling out the crown, rotating it quickly
in succession in either direction will cause the
hands to move forward or back at high speed.
While the hands are moving forward at high
speed, quickly rotating the crown in
succession again will increase the speed even
further.
Stopping Fast Forward/Fast Reverse
●
Rotate the crown in the direction opposite that
of the ongoing operation or press any button.
Note
If you do not perform any operation for
●
about two minutes after pulling out the
crown, crown operations will
automatically become disabled. If that
happens, push the crown back in and
then pull it out again.
Hand and Day Indicator
Movement
Mode hand
Day indicator
Mode Hand and Day Indicator
●
Movement
Changing the day setting of the watch will also
cause the mode hand to move.
Day
●
It can take anywhere from about 10 to 40
●
seconds for the day indicator to change
after timekeeping reaches midnight. The
mode hand moves as the day indicator
changes.
The day may not be indicated correctly
●
while the watch's crown is pulled out.
3