Cup Holder: 3
Tire Changing Tool: 3, 5
2) Push the under-hood release lever up
with your finger, as shown in the illustra-
tion. While pushing the lever, lift up the
engine hood.
81A2047
3) Continue to lift up the hood until it is
high enough to support with the prop
rod.
OTHER CONTROLS AND EQUIPMENT
To close the engine hood:
1) Lift the hood up slightly and remove the
prop rod from the hole. Put the prop rod
back to the holding clip.
81A2048
2) Lower the hood to about 20 cm above
the hood latch, then let it drop down.
Make sure the hood is securely latched
after closing.
WARNING
Make sure the hood is fully closed
and latched before driving. If it is not,
it can fly up unexpectedly during
driving, obstructing your view and
resulting in an accident.
81A2093
4-10
81A2G-01E
Need help?
Do you have a question about the Jimny and is the answer not in the manual?