Tpms Setting; To Set The Initial Value Of Tire Pressure - Suzuki Jimny Owner's Manual

OPERATING YOUR VEHICLE

TPMS Setting

You can set one of the initial value of tire
pressure below that is indicated on the tire
information label.
– Unladen Mode
– Laden Mode
WARNING
When the loading weight
changed, adjust the tire pressure
according to the tire information label
and set the initial value via the infor-
mation display. If the loading weight,
tire pressure and initial value do not
match, the tire pressure monitoring
system will not function properly.
5-23

To set the initial value of tire pressure

EXAMPLE
has
( 1 )
1) When the ignition switch is in the "ON"
position and the vehicle is stationary,
push both the clock knob (1) and trip
meter selector knob (2) on the instru-
ment cluster to change the information
display to the setting mode.
EXAMPLE
2) Push and hold the trip meter selector
knob (2) to enter the initial value set-
ting.
( 2 )
EXAMPLE
81A2101
NOTE:
If you exit the setting mode, push the trip
meter selector knob (2) quickly to select
"End" and push and hold the trip meter
selector knob (2).
81A2076
81A2071
81A2G-01E