Related Manuals for Logitech SMARTDOCK FLEX
Summary of Contents for Logitech SMARTDOCK FLEX
- Page 1 SMARTDOCK FLEX...
- Page 2 INTRODUCTION: This document is written for installers setting up a Skype Room System with Logitech SmartDock and Logitech SmartDock Flex. Installer: the installer should have the following knowledge and skills: • Basic networking • Basic AV Separate from the physical installation. a system administrator will need the following knowledge and skills: •...
-
Page 3: Operating Environment
OPERATING ENVIRONMENT INSTALLATION Steps 1-7 may be skipped if Surface Pro Logitech SmartDock and Logitech SmartDock Flex are designed for use in is already installed in SmartDock. Please office and meeting room environments not to exceed 35 degrees Celsius / 95 ensure Surface Pro is completely powered degrees Fahrenheit. - Page 4 English English Disassemble SmartDock Remove Bezel Remove Bezel Screws.
- Page 5 English English Plug in and install Surface Pro. Remove Metal Bracket...
- Page 6 English English Install Bezel Reassemble SmartDock Install Metal Bracket.
- Page 7 English English Remove SmartDock base cover and put Install Bezel Screws aside. With SmartDock Flex, this cover will no longer be needed.
- Page 8 English English Apply color coded label in the SmartDock Connect external cables connector area as shown. to SmartDock Flex base. -CAT6 Cable -USB Cable (Optional) -HDMI content sharing Cable (included with Logitech SmartDock) -Logitech GROUP Speakerphone DIN Connector (Optional)
- Page 9 English Once connected, secure all external English cables tightly with the included cable ties Rotate the SmartDock base to facilitate Trim off excess for tidy installation. SmartDock Flex cable connection.
- Page 10 English English Connect SmartDock to your local area Connect SmartDock Base cables, network (LAN) via ethernet and route the matching connectors to color coded cable through SmartDock Flex cable exit. label.
- Page 11 CAT6 cable. Additional extenders, hubs or switches should not be used between SmartDock Flex base and extender box. Longer cables up to 15m (50ft) may be used, provided they are CAT6, SFTP and AWG number of 23 or lower.
- Page 12 English English Connect external devices to the When placing the extender box, SmartDock Flex Extender Box. If only one ensure that the side cooling vents are external display is connected, please ensure unobstructed and have access to open that display is connected to HDMI 1.
- Page 13 English - When done, simply disconnect the USB and HDMI from your laptop, and all Connect power to the SmartDock Flex of the devices revert back to the Skype Extender Box. Room System, ready for the next person.
- Page 14 LAN / Internet (required) HDMI 2 Display 2 (optional) SmartDock and HDMI 1 Display 1 (required) SmartDock Flex Base USB 2.0 USB Audio or Video Device (optional) SmartDock Flex CAT6 (up to 15m/50ft) Extender Box USB 2.0 USB Audio or Video Device (optional)
- Page 15 English ©2018 Logitech. Logitech, Logi and other Logitech marks are owned by Logitech and may be registered. All other trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that Power on Surface Pro. may appear in this manual. Information contained herein is subject to change without notice.