Help Menu; Connecting The Printer; Usb Connection - Monoprice MP Education Guider II User Manual

Help Menu

The Help Menu contains the following options.
First Run Wizard: Re-runs the wizard that automatically runs the first time MP FlashPrint
is run.
Help Contents: Allows you to read the help files.
Feedback: Allows you to submit feedback.
Check For Updates: Checks for MP FlashPrint updates.
About MP FlashPrint: Displays MP FlashPrint version information.

CONNECTING THE PRINTER

There are three ways of connecting the MP FlashPrint software with the Guider II printer -
a wired USB connection, a wireless connection with the printer serving as the Wi-Fi access
point/WLAN hotspot, or a wireless connection using an existing Wi-Fi® access point.

USB Connection

Perform the following steps to connect your PC to the Guider II printer using a wired USB
connection.
1. Plug one end of the included USB cable into the USB port on the printer, then plug
the other end into a USB port on your computer.
2. Power on the printer and your computer, then start the MP FlashPrint software.
3. Click Print > Connect Machine.
4. Set the Connection Mode to USB and set the Select Machine option to the Guider II
printer. If the printer does not appear in the Select Machine list, click the Rescan
button. If it still does not appear, reinstall the driver software.
46