Table of Contents
Advertisement
Industrial Panel PCs
Troubleshooting
To solve the following problems, you may need to refer to Appendix
A Standard Timing for compatible display specifications.
1.
Problem:
Actions:
2.
Problem: No Display is shown on the LCD monitor.
Actions:
AMB-551-D Series User Manual V1.0
Unclear or Unsteady Display
Activate the AUTO button. You might need to repeat to
find balanced values for a good quality.
If the AUTO button cannot solve the problem, try to
manual fine tune following steps below:
1.
If the image size does not fit the screen, adjust the
Clock value under "Monitor" menu.
2.
If there is image pixel noise appears, adjust the
Phase setting value under "Monitor" menu. Pull
and adjust the value bar to find out what is the best
clarity range for your LCD display.
3.
If the image is not centered after step 1 and 2,
adjust H Position or V Position under "Monitor"
menu to center the image.
4.
If you still have problem to fine-tune the image, call
your local technical support for assistance.
1.
Make sure the Panel PC is powered on by checking
if the Power LED is lit. Check if all the connections
of the external VGA cable are secure and the
system is running correctly.
2.
If the power LED lights up green, but there is still
nothing displayed; connect your PC with another
AMB-5 5 1 -D
32
Advertisement
Table of Contents
