Attaching An Arm Stand; Antitheft Security Slot - JVC CL-R190 Instruction Manual

Attaching an arm stand

Any commercially available arms (or commercially available stand)
can be attached:
• Come with a mounting plate with 4 slotted screw holes at 100 mm
x 100 mm, and
• Bear the total weight of the LCD panel and the cables connected to
it. For more information, ask the arm maker.
Caution
Choose the screw size carefully according to the plate thickness. If the screws
are too long, they could damage the internal parts. If they are too short, the
connection becomes loose and the monitor could fall off.
Mounting plate thickness
Note: We are not liable for any damage or injury resulting from replacing stands.
How to attach an arm stand
1
Place a soft cloth or cushioning material over a stable even surface.
2
Put the monitor face down on the soft cloth.
3
Remove the originally attached stand from the monitor.
4
Attach an new arm stand.
Do not try to attach the panel to the arm that is already fixed in place by
Note
yourself. Ask for assistance from another person. Tipping the panel over or dropping
it could cause damage and/or injury.

Antitheft security slot

The monitor is equipped with the security slot supported by MicroSaver Security Lock
System by ACCO Brands Corporation. The MicroSaver locks are available at PC
supply stores.
* Kensington is the registered trademark of ACCO Brands Corporation.
English
3.5 - 4.5 mm
1.5 - 3.5 mm
Below 1.5 mm
Screw size
ISO M4 x 12
ISO M4 x 10 (Supplied)
ISO M4 x 8
Security slot
- 36 -