Wiring Instruction - ATCOM A40 Quick Start Manual

A40/A41(W) Quick Start Guide
Step1. Use needle or some other tools to insert into the hole of the plastic sheet, hog the plastic
sheet.
Step2. Lift out the plastic sheet
Step3. Take off the plastic sheet
Step4. Use needle or some other tools to insert into the edge of the paster, hog and lift out the
paster
Step5. Write down the identification of each programmable key on the paster after taking off the
paster
Step6. Put back the paster
Step7. Insert the plastic sheet into the slot
Step8. Push the other side of the plastic sheet into the other slot

1.4. Wiring instruction

After stand bracket fixed, please plug in all wires or cables as below:
7