Meter Views - An Overview; Starfish View - DK-Technologies DK T7 User Manual

Meter Views – an Overview
This section gives you a quick overview of the different views available in the DK T7.

StarFish View

The StarFish view, builds on
the heritage of the famous DK-
Technologies MSD meter range
and features a Vectorscope
alongside a bargraph section
allowing for both level and
loudness views. In addition, the
four text readouts are
displayed on the upper right
section of the screen.
In addition to the regular
meters and read-outs, the
StarFish view features a Time
code display below the
StarFish®, which allows you to
follow either the internal time-
code used during Loudness
automation or external SMPTE time code.
Moving Coil Mode
DK T7s StarFish view offers and alternative setup showing Moving coils
rather than bargraphs. There are two moving coil modes; 'regular' and
'dual' The 'Moving Coil dual ' mode allows you the ultra-wide Moving Coil
instrument displaying left and right channel in the same instrument,
while the regular mode will give you a separate moving coil instrument
for each input channel.
Picture Preview
The Picture preview confidence monitor, enables you to quickly monitor
the picture from the incoming SDI stream (3G/HD/SD) to ensure that you
are monitoring the correct stream. The Picture preview field may be
turned on/off or 'dragged' in position and resized to your liking.
8 | P a g e