Table of Contents
Advertisement
Set Up Meter Text
Read-out
Hit the Text Read-out area to open up the Meter lines menu.
The menu contains the settings for the four Text lines of the DK T7 display.
Line 1 is always in a bigger font, while 2, 3 and 4 are small font.
It is completely up to you what information you want to display in each line.
A number of different parameters are available for display:
Parameter
Off
Loudness Select
Momentary
Shorttrm
Integrated
Loudness LRA
Reclaim Factor
Momentary Max
Shortterm Max
Gate Hold
Peak Level Max
SMPTE Time
Start Time
Stop Time
Resume Time
Shortterm Time
Filter Type
Preset Audio
Volume
Loudness Preset
Reserved
21 |
P a g e
Note
The Line is removed
Will show Integrated or Shortterm loudness depending on what
is Selected (see button setup for details)
Momentary Loudness
Shortterm Loudness
Integrated Loudness
Loudness Range
Reclaimin Factor
Max. Momentary Loudness reading
Max. Shortterm Loudness reading
Indicates whether the Loudness gate is on hold or capaturing
data
Max. True Peak
Incoming SMPTE time display
The time of the sliding Shortterm Loudness Window 3, 10 or 30
seconds
Loudness Filter used K-Filter or LEQM
The name of the current preset
Volume level, used for controlling Headphone out (TBA)
The current Loudness Preset being used.
For future use
Advertisement
Table of Contents
