Table of Contents
Advertisement
Basic Operation
Touch Zones & Navigation
The DK T7 is a multi-touch sensitive device allowing for both slides, tap and
Press & Hold functions.
The basic operation of the DK T7 is based on simply touch the area of the screen
that you would like to interact with.
Touching
Touching a specific area, will call up the relevant menu points and allow you to
alter settings in an instant.
Exiting a menu is always done by hitting the top menu bar on the left hand side.
Selecting a Parameter
When inside a menu, there are several ways of selecting a specific parameter.
1)
Touching the desired parameter directly. This also used to open/close folders inside the menu structure
2)
Sliding the menu until your parameter is in sight by simply sliding your finger up/down the screen on
the mid-left hand side of the menu
3)
Moving the cursor to the desired position by sliding on the far right hand side of the menu.
Auto Storing Feature in the DK T7
The DK T7 features an 'Instant Store' facility that constantly stores any parameter change to the current preset.
This means that there is no need for manually storing presets, as your changes take effect at the moment of
performing them
7 |
P a g e
Advertisement
Table of Contents
