Table of Contents
Advertisement
& Audio Routing
Understanding the Basic Signal flow of the DK T7
As you are probably already aware, the DK T7 is a quite complex product with a lot of different signal routing
sources and destinations i.e. SDI, AES, Analogue as well as internal signal sources with destinations of
Bargraphs, Text Readout, StarFish, FFT, Loudness measurement and Downmix possibilities.
In order to simplify the overall routing, the DK T7 features a semi-automated routing scheme based on the
different signal source Types.
This allows you to simply select the appropriate source and type/role for your bargraph meter and DK T7 will
automatically define the rest of the routing.
For the same reason, it is very important for you to set up the bargraphs correctly, as this will define the rest of
the metering setup.
There are three important parameters to be aware of in setting up your Bargraph meter:
-
Source Select – touching the top legend bar of the meter
-
Source Label or Naming – touching the top legend bar of the meter
-
Defining the Type of your source – touching the actual bargraph element
Reading through the below # 1, 2 and 3 sections will give you an understanding of the basic setup parameters.
1 - Source
Selection –
Choosing your input
10 |
P a g e
Touch the Top bar to access the Source
Selection Menu
Advertisement
Table of Contents
